Descargar Imprimir esta página

Whirlpool GLADIATOR FREEZERAT Manual De Uso Y Cuidad página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Full-width WireBasket
To Remove
and
Replace
the Basket:
1,
Remove
all items from basket.
Remove the basket
by lifting the
front out of the ball-bearing
slides, then lifting the basket
out.
2.
Replace the wire basket by first extending
the ball-bearing
slides,
then lowering
the tabs on the sides of the wire basket
into the
slides. Push the basket backward
until it is under the shelf.
To Remove
and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
Frozen Food Storage Guide
Storage
times will vary according
to the quality and type of food,
the
type of packaging
or wrap used (should
be airtight and moisture-
proof), and the storage
temperature.
Seal the package
or container
securely to prevent taste and odor transfer throughout
the product.
Ice crystals inside a sealed package
are normal.
Put no more unfrozen
food into the freezer than will freeze within
24 hours (no more than 2 to 3 Ibs of food per cubic foot [907 to
1,350 g per 28 L] of freezer space). Leave enough
space in the
freezer for air to circulate
around packages.
The freezer door must
close tightly.
For more information
on preparing
food for freezing,
check a freezer guide or reliable cookbook.
DOOR FEATURES
To Remove
and Replace the Shelf:
1. Remove the wire door shelf by lifting it out of the door rail.
2. Replace the door shelf by sliding it into the back of the door rail
and snapping it into place.
The door rails may be removed
for easier cleaning.
To Remove
and
Replace
the Rails:
1.
Remove the rails by pulling straight
up on each end of the rail.
2.
Replace the rails by sliding the shelf rail into the slots on the door
and pushing
the rail straight
down until it stops.
To Remove
and Replace
the Rack:
1.
Remove
the rack by lifting it and pulling straight
out.
2.
Replace the rack by sliding it in above the supports
and pushing
it down until it stops.
11

Publicidad

loading