Publicidad
ENGLISH
3. OPERATION
1. Pour in the ingredients and cover the jug. Then place the jug in the main body. Fig. 2
2. Plug the appliance into a power supply.
3. Turn the speed knob to set the desired speed:
A. Turn the knob to the left (counterclockwise) to select PULSE mode.
B. Turn the knob to the right (clockwise) to select the desired speed setting: 1-4.
4. At the end of preparation, turn the speed knob to position 0, switch off the appliance and
wait until the blades come to a complete stop.
5. Remove the jug and remove the lid. Then, pour in the ingredients.
6. Do not use the blender continuously more than 2 minutes. Allow the appliance to cool
down for 20 minutes before the next operation in case the motor is overheated.
Ice crushing
It is recommended to use the "Pulse" function at maximum power and to add a little water with
the ice.
4. CLEANING AND MAINTENANCE
-
Before cleaning the appliance, switch it off and unplug it from the power supply.
-
When cleaning, take special care with the blades, as they are sharp.
-
It is advisable to clean the appliance regularly and to remove food residues.
-
If the appliance is not properly cleaned and maintained, the surface may deteriorate, which
will affect the lifetime of the appliance and may lead to hazardous situations.
-
The following parts are dishwasher safe: jug, jug lid and measuring cup.
Cleaning
-
To clean the blades properly, first rinse the jug with water. Fill the jug with 400 ml of
lukewarm water and add some detergent soap. Close the jug with the lid and run the
machine in PULSE mode for 2 seconds at a time. Repeat the process as many times as
necessary.
-
To finish cleaning the blender, turn the knob to the "0" position, turn the switch off and
unplug the appliance after each use and before cleaning.
-
Use water to clean the jug. Do not use chemical or harsh abrasive cleaning agents.
-
Never submerge the motor base or the blade holder in water.
-
Use a dry, soft cloth to clean the motor base. Do not clean this part with a wet cloth.
Maintenance
-
If the product does not operate normally, produces uncommon noises, or shakes more
than it normally does, stop using the product and contact the Technical Support Service of
32
POWER BLACK TITANIUM 1800MAX WIZARD
POWER BLACK TITANIUM 1800MAX WIZARD GO
Cecotec for reparation.
-
Do not carry out maintenance tasks yourself.
Storage
-
After cleaning the device, make sure it is thoroughly dried before storing it.
-
After using the product, store it in a dry, safe place.
-
Avoid direct exposure to sun light.
-
Make sure it is stored in a place out of the reach of children.
5. TECHNICAL SPECIFICATIONS
Product reference: 04382/03906
Product: Power Black Titanium 1800MAX Wizard / Power Black Titanium 1800MAX Wizard Go
Voltage: 220 - 240 V~
Frequency: 50 - 60 Hz
Power: 1250 W
Maximum locked motor power: 1800 W
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations,
the product and/or batteries must be disposed of separately from
household waste. When this product reaches the end of its shelf life,
you should dispose of the cells/batteries/accumulators and take
them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for
information concerning the correct disposal of old appliances and/
or their batteries.
Compliance with the above guidelines will help protecting the environment.
7. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
ENGLISH
POWER BLACK TITANIUM 1800MAX WIZARD
POWER BLACK TITANIUM 1800MAX WIZARD GO
33
Publicidad
