Publicidad
Idiomas disponibles
Idiomas disponibles
USE TORQUE WRENCH
1. Balance the wrench in your left hand and unlock knurled handle by turning locking knob anti
clockwise.
2. Set torque amount by turning knurled handle see example 11,4 Nm.
A. Turn handle until 0 on fine scale reach 10 on base scale.
B. To set 11,4 Nm turn handle until fine scale reach 1,4.
C. Lock handle by turning the locking knob clockwise.
3. Install the proper socket or attachment to nut or bolt and pull handle until you feel and/or hear the
wrench click.
4. Setting of Nm scale is done in the same way as above, by necessity this scale is not calibrated in
even numbers so setting will be more approximate or use the conversion table.
EXAMPLES OF TORQUE SETTING (11,4 Nm)
Step 1
Position during storage
Base scale = 2
Fine scale = 0
IMPORTANT NOTES
•
Do not pull after the wrench clicked. Use special care at low torque settings.
•
If the wrench has not been used for a longer time, operate it several times at low torque to allow
internal lubricant to recoat.
•
When not in use, keep lowest torque setting.
•
Do not turn handle below lowest torque setting.
•
Your torque wrench is a precision measuring instrument and should be treated as such.
•
Clean only by wiping. Do not use any type of cleaner which may affect the special internal
lubricant with which this wrench is packed at the factory.
•
Do not attempt to turn the grip while it is locked.
MAINTENANCE
Periodically, all torque wrenches should be checked for accuracy. This should be done at least once a
year or every 10.000 torque application cycles, whichever comes first.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Turn handle clockwise direction
Base scale = 10
Fine scale = 0
6
e
s
s
a r t S
h
c
s
m
e
R
Step 2
Turn handle clockwise direction
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
Step 3
Base scale > 10
Fine scale = 1,4
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
