cecotec BOLERO COOLMARKET UF 380 INOX D Manual De Instrucciones página 76

ENGLISH
7. Adjustable foot
h. Install the bottom hinge assembly on the lower left side of the freezer and
install the left adjustable leg on the lower right side of the freezer (Fig. 11).
Legend Fig. 11:
4. Lower hinge
5. Screws
6. Adjustable foot
i. Remove the door stop and the right-hand door clamp system from the bottom right-hand
side of the door, remove the left-hand door clamp system from the accessory bag, then
install it together with the door stop on the left-hand side of the door (Fig. 12).
j. Install the door on the freezer (Fig. 13).
k. Remove the upper left hinge from the accessory bag, fix it to the door with the
screws and then connect the power cable (Fig. 14).
l. Remove the upper left hinge cover from the accessory bag, install the switch
you removed from the right hinge cover into the fixed slot inside the left hinge
cover. Then connect the communication cable and install the left hinge cover
with its screws (Fig. 15).
m. Install the magnet removed from the top right side of the door on the top left
side of the door (Fig. 16).
n. Remove the caps from the door handle fixing screws, remove the screws and
remove the handle (Fig. 17).
o. Install the handle on the opposite side of the door, turning it 180° vertically,
screw in the fixing screws and their caps (Fig. 18).
p. After installing the door handle, the installation is complete (fig. 19).
NOTE: do not connect the freezer until installation is complete.
76 BOLERO COOLMARKET UF 380 INOX D