cecotec BOLERO COOLMARKET UF 380 INOX D Manual De Instrucciones página 77

4. OPERATION
Fig. 20 Control panel
1. Temperature indicator
2. Freezer mode
3. Fast Freezing
4. Alarm
5. Temperature increase
6. Temperature decrease
7. Function selection
8. Lock/Confirm OK
9. Refrigerator mode
10. Fast Cooling
11. Child Lock
12. Temperature units
When you connect the freezer to the power supply for the first time, all icons on the display
will light up for 2 seconds, and the system will activate the freezer mode at -18ºC. When
the door is closed, the display will automatically switch off if no button is pressed within 3
minutes. The display will light up if you open any door or press any button.
Functions
11. Change between the refrigerator and freezer modes
Hold down the temperature decrease button for 3 seconds to change between the
refrigerator and freezer modes.
12. Temperature settings
- Press the temperature increase or decrease buttons, the temperature indicator will start
flashing, press these buttons again until you reach the desired temperature. Finally, press
the lock/OK button or wait for 5 seconds to confirm the temperature setting.
- The temperature setting cycles are:
- On the refrigerator mode: 2ºC→3ºC→4ºC→5ºC→6ºC→7ºC→8ºC
- On freezer mode: -16ºC→-17ºC→-18ºC→-19ºC→-20ºC→-21ºC→-22ºC→-23ºC→-24ºC
13. Fast freezing
- When you activate the fast freezing function, the freezer-compartment temperature will
be set to -32°C automatically for 26 hours. The fast-freezing function is used to prevent
loss of nutritional quality and to preserve food freshness.
- With the fast-freezing function active, you will not be able to make any temperature
setting. This function can only be activated on the freezer mode.
BOLERO COOLMARKET UF 380 INOX D
ENGLISH
77