cecotec BOLERO COOLMARKET UF 380 INOX D Manual De Instrucciones página 83

You cannot
set the
temperature.
The freezer-
compartment
temperature is
shown on the
panel, but it
flashes.
Note:
If none of these situations match your problem, do not attempt to disassemble or repair
the freezer yourself. Repairs carried out by unqualified persons may result in injury or
serious malfunctions. Please contact the place where you bought the appliance or Cecotec's
Technical Support Service. The repair must be carried out by an authorised technician, and
you must use only original spare parts.
Error code
E0 (while the freezer-compartment icon is lit
up)
E1
EC
EH
- If faults E0 and E1 should light up simultaneously, E2 will light up instead.
- If any of these codes is shown, contact the Technical Support Service of Cecotec.
8. TECHNICAL SPECIFICATIONS
You can find more information on this model by scanning the QR code on the energy label.
Product
Reference:
Check that the fast cooling or freeze
functions are not active on the
control panel.
Check that the power supply has not
been cut off before.
Bolero CoolMarket UF 380 inox D
02446
Deactivate the special functions and
then set the temperature (for more
details, check the operation section).
Press any button to activate the
alarm (check the overheating
warning section) and check that
the food inside the freezer is not
spoiled.
Error type
Fault of the temperature sensor
Fault of the evaporator sensor
Fault in the communication
Fault of the room temperature sensor
BOLERO COOLMARKET UF 380 INOX D
ENGLISH
83