Publicidad
Foldable 3in 1 Wireless Charger, 15 W
EN
Chargeur sans Fil 3en 1, Pliable, 15 W
FR
Do not operate a device if it is not in working order. In such ca-
ses, it must be secured against unintentional further use.
• Use product, product parts and accessories only in per-
fect condition.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against acci-
dental use.
Heat storage
Heat is generated during inductive charging.
• Make sure that there are no metal parts on the back of your
device (e.g. metal cover, metal plate for magnetic holder).
Metal heats up strongly in the induction field and can cause da-
mage to the product or your end device.
• Do not cover the product
Magnetism
The product contains magnetic materials.
• Consult a medical professional before you use the product to
make sure it is compatible with implanted medical devices.
• Maintain a minimum distance of 20 cm from medical devices.
• Do not operate and/or store the product near credit, debit or
other bank cards.
Tripping hazard
• Install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for
example by dropping or stumbling.
2 Description and function
2.1 Product
The product is an inductive charging station including adapter
cable for wireless charging of up to 3 devices simultaneously.
It serves the Qi standard with up to 15 W power for the smart-
phone, 2.5 W for the smartwatch and 5 W for earphones.
The charging surface for smartphones is equipped with a ma-
gnetic ring that ensures that compatible devices (e.g. smart-
phones with MagSafe technology) automatically dock in the cor-
rect charging position.
2.2 Scope of delivery
Foldable 3in1 Wireless Charger, 15 W, User Manual,
Adapter Cable
2.3 Operating Elements
See Fig. 1.
1 USB-C
-socket
TM
2 LED status indicator
3 Charging area smartphone
4 Charging area smartwatch
3 Intended use
This product is intended exclusively for private use
and its intended purpose. This product is not intended
for commercial use. We do not permit using the device
in other ways like described in chapter „Description
and Function" or in the „Safety Instructions". Use the product
only in dry interior rooms. Not attending to these regulations and
safety instructions might cause fatal accidents, injuries, and da-
mages to persons and property.
IPX0: This product is not protected against water.
4 Preparation
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensu-
re compatibility.
5 Connection and operation
1. Connect the charger to a suitable mains adapter via the ad-
apter cable.
A mains adapter is not included in the scope of delivery. The
mains adapter requires a minimum power of 36 W and must
support the PD or QC standard so that all functions can be
used without restriction.
2. Plug the mains adapter into a free and easily accessi-
ble outlet.
As soon as the charger is connected to a power source, the
LED status indicator (2) lights up green and turns off after ap-
prox. 5 seconds.
3. Place your terminal devices on the charger.
You can use all three charging areas simultaneously.
When a device is placed on a charging surface, the status LED
REV2023-12-07
Subject to change without notice. |
V1.0anw
Sous réserve de modifications.
5 Charging area earphones
6 USB-A plug
7 USB-C
socket
TM
lights up green and turns off after approx. 30 seconds.
If your terminal is placed incorrectly or a metallic object is de-
tected on the charging surface, the status LED flashes.
4. Remove your terminals from the charger when they are ful-
ly charged.
6 Maintenance, Care, Storage and
Transportation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and
dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminati-
ve and hazardous substances can damage the health
and pollute the environment.
As a consumer, you are committed by law to dispose electrical
and electronic devices to the producer, the dealer, or public col-
lecting points at the end of the devices lifetime for free. Particu-
lars are regulated in national right. The symbol on the product, in
the user manual, or at the packaging alludes to these terms.
With this kind of waste separation, application, and waste dispo-
sal of used devices you achieve an important share to environ-
mental protection.
WEEE No: 82898622
8 EU Declaration of conformity
Hereby Goobay®, a registered trademark of Wen-
tronic GmbH, ensures that the mentioned radio
system type is conformed to Directive 2014/53/EU.
The full text of EU Declaration of Conformity is available at the
following Internet address:
https://www.wentronic.com/en/
Enter the item number in the search bar to go to the specific
item page. The current declaration of conformity is available in
the download section.
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et comprend
d'importantes informations pour une bonne installation et une
bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement avant
de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et trans-
fert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il doit au
contraire être protégé contre toute utilisation involontaire.
• Utilisez le produit, pièces et accessoires des produits unique-
ment en parfait état.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d'autres problèmes, non récupéra-
bles par la documentation, contactez votre revendeur ou le
producteur.
• Éviter des conditions extrêmes, telles que la chaleur extrême
et froid, l'humidité et de la lumière directe du soleil, ainsi que
microondes, des vibrations et de la pression mécanique.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre l'uti-
lisation accidentelle.
Accumulateur de chaleur
De la chaleur est générée pendant la charge par induction.
• Assurez-vous qu'il n'y a pas de pièces métalliques à l'arrière
de votre appareil (par exemple, un couvercle métallique, une
plaque métallique pour le support magnétique).
Le métal se réchauffe fortement dans le champ d'induction et
peut endommager le produit ou votre appareil final.
• Ne couvrez pas le produit.
Magnétisme
Le produit contient des matériaux magnétiques.
Goobay® by Wentronic GmbH | Pillmannstraße 12
- 3 -
38112 Braunschweig | Germany | cs@wentronic.com
65312
Material damage
Publicidad
