Publicidad
Idiomas disponibles
Idiomas disponibles
• Tools must be cleaned regularly.
• Tool parts made of light alloys may only be cleaned,
e.g. of resin, with solvents that do not impair the me-
chanical properties of these materials.
1. Tools and tool bodies must be clamped in such a way
that they cannot come loose during operation.
2. Extending the key or tightening it with the help of ham-
mer blows is not permitted.
3. The clamping surfaces must be cleaned of dirt,
grease, oil and water.
4. Spare parts must comply with the specifications for
original parts supplied by the manufacturer.
5. Maintenance work and modifications to circular saw
blades should only be carried out by a competent per-
son, i.e. a person with specialist training and experi-
ence who is familiar with the requirements for con-
struction and design and who is familiar with the re-
quired safety levels.
Residual risks
The product has been built according to state-of-the-
art and the recognised technical safety rules. Howev-
er, individual residual risks can arise during opera-
tion.
• Damage to hearing if the stipulated hearing protection
is not worn.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that your
product provides optimum performance.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
WARNING
This power tool generates an electromagnetic field
during operation. This field can impair active or passive
medical implants under certain circumstances. In order
to prevent the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants consult
with their physician and the manufacturer of the medical
implant prior to operating the power tool.
ATTENTION
The product is part of the 20V gomag series and may
only be operated with batteries of this series. Batteries
may only be charged with battery chargers of this se-
ries. Observe the manufacturer's instructions.
WARNING
Follow the safety instructions and the notes
regarding charging and correct use, as speci-
fied in the operating manual for your 20V go-
mag series battery and battery charger. A de-
tailed description of the charging process
and further information are provided in this
separate manual.
22 | GB
6
Technical data
Cordless hand-held circular
saw
Engine voltage
Idle speed n
Weight (without battery)
Max. cut depth
at 90°
at 45°
Saw blade
Dimensions
Tooth thickness / cutting
thickness
Size of hole
Number of teeth
Idle speed n max
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
The noise and vibration values have been determined in
accordance with EN 62841-1.
Noise data
Sound pressure L
Measurement uncertainty K
Sound power L
Measurement uncertainty K
Vibration parameters
Vibration a
Handle
Measurement uncertainty K
The total vibration emission values specified and the de-
vice emissions values specified have been measured in
accordance with a standardised test procedure and can
be used for comparison of one electric tool with another.
The total noise emission values specified and the total vi-
bration emission values specified can also be used for an
initial estimation of the load.
www.scheppach.com
0
Ø165 mm x Ø20 mm x
pA
pA
wA
wA
Sawing in wood
h
BC-HCS165-X
20 V
4500 rpm
2.8 kg
approx. 55 mm
approx. 40 mm
1.0 mm
1.6 mm
Ø20 mm
24 teeth
9200 rpm
80.1 dB
3 dB
88.1 dB
3 dB
2
3.368 m/s
2
1.5 m/s
Publicidad
