Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
Due to the safety regulations governing air and maritime
transport, the machine battery comes separate. Follow
the steps below to connect it:
Before proceeding, make sure that the on/off
switch (11) and the master switch (15) are OFF.
1) Turn the machine onto its back. Remove the three screws
(O) and the four feet (Q) to take off the protective screen.
2) Plug in the yellow connector. Then replace the protective
screen and return the machine to its natural position. Using
the power adapter supplied with the machine, charge it to
100% before using it.
Contents
021
1. INTRODUCTION AND GENERAL OVERVIEW
1.1
OVERVIEW
1.2
TRANSPORT AND PACKAGING
1.3
IDENTIFICATION LABEL
023 — 024
2.
SAFETY MEASURES
2.1
REGULATIONS
2.2
SAFETY DEVICES
2.3
RESIDUAL RISKS
025
3.
INSTALLATION AND PREPARATION OF THE MACHINE 25
3.1
ENVIRONMENTAL CONDITIONS IN THE WORKSHOP
3.2
CHARACTERISTICS OF THE LOCATION FOR INSTALLATION
3.3
PREPARATION OF THE MACHINE
026 — 024
4.
CHARACTERISTICS OF THE MACHINE
4.1
KEY NOMENCLATURE
4.4
MAIN PARTS OF THE MACHINE
4.3
TECHNICAL DATA
4.5
COMPONENTS AND FUNCTIONAL PARTS
028 — 013
5. OPERATION AND FUNCTIONS
5.1
DEPTH ADJUSTMENT
5.2
LATERAL ADJUSTMENT
5.3
KEY COPYING
11
030 — 033
6.
MAINTENANCE
21
6.1
Brush Replacement
21
6.2
Cutter Replacement
21
6.3
Tracer Replacement
21
6.4
Carriage Depth Adjustment
6.5
Accessing the Lower Housing
23
6.6
Replacing the Battery
23
6.7
Replacing the Electronic Card
6.8
Replacing the Jack Connector
23
24
6.9
Replacing the Master Switch
6.10
Accessing the Machine Interior
6.11
Replacing the Power Switch
6.12
Replacing and Tightening the Belt
6.13
Replacing the Motor
25
25
034
25
7.
WASTE DISPOSAL
7.1
SWARF
7.2
PACKAGING
26
7.3
MACHINE
26
26
099 — 107
26
8.
FIGURES
27
108
28
8.
EXPLODED VIEW
28
28
28
15
O
Q
30
30
30
31
31
31
31
31
32
32
32
32
32
33
34
34
34
34
99
108
Publicidad
