Publicidad
Idiomas disponibles
Idiomas disponibles
Paper Shredder
Operating Instructions
Warning
Installation
Operation
Maintenance
Troubleshooting
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
INSTALLATION
1. This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly
mounted on to the included wastebasket. THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROP-
ERLY MOUNTED AS PICTURED. (FIGURE 1)
2. A socket-outlet should be near the equipment and be easily accessible.
3. Connect the power cord to any standard 220-240 volt AC outlet.
!
Caution:
Microscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
4
ENGLISH
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Duty Cycle
Voltage
FIGURE 1
5 sheets of 80 gsm paper*
6 sheets of 70 gsm paper*
4 mm x 12mm pieces
220 mm
1 at a time
3 min. on / 30 min. off
220-240V/50-60Hz 1.2A
Publicidad
