AmazonBasics B00TOAK5Q6 Manual De Instrucciones página 5

OPERATION


Control Switch

Using the switch located on the unit, select one of the following settings by sliding the switch either left
or right. (FIGURE 2)
FIGURE 2

I
AUTO / ON:
This setting allows the shredder to be automatically started by insert-
ing paper into the feed slot. Always feed the paper in as straight
as possible. When the paper has passed through, the shredder will
automatically stop. (FIGURE 2)
O
OFF:
This setting turns off all features of the shredder. For safety reasons,
we recommend that you leave the shredder in the "Off" position
whenever the shredder is unattended or not in use. (FIGURE 2)
R
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used
to help clear the cutters of paper that did not pass through. Never
attempt to clear a jam by using the reverse function until you have
emptied the wastebasket. (FIGURE 2)
CONTINUED NEXT PAGE
ENGLISH 5