PeakTech P 3360 Manual De Instrucciones página 62

5.15. Temperature measurements
Warning:
To avoid electric shock, disconnect both test probes from any
source of voltage before making a temperature measurement.
Insert the adapter in the input socket for temperature
measurements.
Insert the K-type thermocouple into the temperature socket, making
sure to observe the correct polarity. Touch the temperature probe
head to the part whose temperature you wish to measure. Keep the
probe touching the part under test until the reading stabilize (about
30 seconds). Read the temperature in the display. The digital
reading will indicate the proper decimal point and value.
Warning:
To avoid electric shock, be sure the thermocouple has been
removed before changing to any other measurement function.
62