Trevi XF 780 KB Guia Del Usuario página 13

BLUETOOTH OPERATION
PAIRING TO DEVICES
1. Place the speaker near the Bluetooth device to pair and turn on the device;
2. Select the bluetooth function using the MODE key (13), the flashing "BLUE" will
appear on the display;
3. Follow the instructions of your external device to search for the speaker;
4. Search for the speaker named "XF 780 KB" and enter the PIN "0000" if required;
5. Once pairing has taken place, the word "BLUE" on the display will remain fixed.
Note:
- The Bluetooth speaker only works with one connection at a time, the connection cannot be
interrupted during normal operation.
- The proximity of TV sets, neon lamps or other appliances can cause disturbances in reception,
in this case move the appliance away.
COMMANDS AVAILABLE IN BLUETOOTH MODE
- Start audio playback from your device.
9
- Press the (14) key once to go to the previous track, press the
to go to the next track.

- Press (15) button to pause, press it again to resume playback.
TWS LINK
TWS technology allows the user to make a wireless connection between two speakers
of the same model and compatible with the TWS function.
1. Turn off the bluetooth function on your phone or other bluetooth device;
2. Turn on both speakers and select "Bluetooth" mode on both;
3. Press and hold for 3 sec. the key
few seconds the two loudspeakers will be paired (a beep will warn of successful
pairing);
4. Turn on Bluetooth on your phone or other device, search and pair the external
device to the speaker. After connection, you will be able to play music with the
TWS stereo-speaker system.
Adjustments on the main speaker will also be made simultaneously on the other
speaker. For example, previous and next track selection, play and pause.
Note:
- If the 2 speakers fail to pair, turn off both devices and repeat steps 1, 2 and 3.
- The TWS function only works between the same speakers or with other speakers using the
same micro processor or solution.

(15) of one of the loudspeakers, after a
:
(16) key once
13