MICRO SD CARD/USB OPERATION
1. Insert a Micro SD card in the slot (4) or a USB stick in the socket (5) and turn on
the device;
2. Playback will start automatically. Otherwise, press the MODE(14) key several times
until USB or TF appears on the display;
9
3. Press the
(14) key once to go to the previous track, press the
to go to the next track;
4. Press
(15) button to pause, press it again to resume playing;
5. Press and hold down key
listening to the track, release the key to return to normal listening;
6. Using the REPEAT(9) key it is possible to activate the track repeat function
(ONE=repeat a single track, ALL=repeat all the tracks present);
7. Use the number buttons on the remote control (20) for direct selection of a track.
LINE IN OPERATION
1. Connect any unit equipped with an audio output via the appropriate 3.5mm Jack
cable to the LINE IN input (3), press the MODE key (13) several times until the
wording "LINE" appears on the display;
2. Adjust the external device by your commands.
MOVING DISCO-LIGHT
To vary the Moving Disco-Light effects, press the LIGHT key (8) several times, the
various light effects will be distinguished on the display with the numbers.
USING THE MICROPHONE
1. Plug the supplied microphone into the MIC1(1) or MIC2(2) jack;
2. Adjust the volume using the control (10) and the ECHO effect of the microphone
using the ECHO - (5) and ECHO + (16) keys;
RECORD FUNCTION
It is possible to record only the speech of the microphone on the microSD/USB memory:
1. Insert a micro SD memory or a USB memory in the respective inputs;
2. Press the REC(4) button on the remote control to start recording; the message
REC appears on the display followed by the recording start time;
3. Press the REC/PLAY(14) key to listen to the recording just made;
4. Press the R-DEL(15) key to delete the recording just made.
Note: When recording from the microphone, it is plausible that there is some background
noise on the recording.
14
9
:
(14) or key
:
(16) to fast forward or rewind in
(16) key once