Franke AQFT0021 Instrucciones De Montaje Y Uso página 5

5. Application
AQUAFIT single-lever mixer with mixing cartridge with ceramic disks and thermo-
static scald protection according to DIN EN 1111, preset to a maximum of 38°C for
the fitting unit. For connection to hot and cold water supply.
With one connection above the other. Fitting housing made of low-lead brass, in
accordance with the requirements of the TrinkwV and DIN 50930-6 recommenda-
tions.
6. Technical specifications
Recommended flow
pressure:
Maximum operating
pressure:
Volumetric flow:
Calculation of flow rate:
7. Scope of delivery
Quantity
1
1
8. Dimensions
9. Installation example
10. Assembly
☞
Important!
Note the installation position of the filters.
10.1 Insert the filters (a).
☞
Important!
Take care that the hole of the tension bolt (b) is vertically aligned.
10.2 Insert the fitting (c) and secure with the grub screw (d).
1-5 bar
10 bar
0.06 l/s at a flow pressure of >1.0 bar
0.06 l/s
Name
AQUAFIT single-lever mixer
Installation and operating instructions
0.06 l/s
5