26. Regarding the instructions for cleaning the surfaces which come in contact with food, speed settings and
operating times, please refer to the below paragraph of the manual.
27. Never eject the beaters or dough hooks when the appliance is in operation.
28. Always check that the speed control is in position "0" before plugging the power cord into the wall outlet. To
disconnect, turn the speed control to position "0", and then remove the plug from the wall outlet.
PARTS DESCRIPTION
1.
Eject button
2.
Speed control
3.
Handle
4.
Beaters
5.
Dough hooks
BEFORE FIRST USE
1.
Carefully unpack the hand mixer and remove all packaging material.
2.
Clean the various accessories of your appliance in warm soapy water, rinse and dry thoroughly before use.
INSTRUCTION FOR USE
1.
Be sure speed control is in the "0" position and the appliance is unplugged from the electrical outlet.
2.
Insert beaters/dough hooks singly at a time, by placing stem end of beaters/dough hooks into the opening
on the bottom of the mixer. Only assemble the provided beaters or dough hooks into the appliance.
Note: the beaters can be inserted in either socket, as the beaters are identical. Turn beater slightly and push
in until it clicks into position.
For dough hooks, the one with washer can only be inserted into the bigger socket and the other one can only
be inserted into the smaller one. The two dough hooks cannot be inserted in reverse.
3.
Plug into appropriate outlet.
4.
Place the ingredients into a bowl suitable for mixing purposes, grip the mixer handle, and position the
beaters in the center of the food to be mixed.
5.
Turn mixer on and adjust speed setting using the control on the top. There are 5 speed settings to be selected.
When kneading yeast dough, suggesting to select the speed control by lower speed and then by higher speed
to achieve the best results.
6.
When you have finished using it, set the speed control switch to "0" position.
7.
Unplug the appliance.
8.
While pressing the eject button, pull out the beaters/dough hooks.
- 3 -