Nolan N-Com R Serie Folleto De Instrucciones página 58

EN
10. MUSIC VIA BLUETOOTH
To pair up an Mp3 device to the B902L system, follow the procedure illustrated in Chapter 7.
Play music (Play)
Pause function (Pause)
Next track (Skip)
Previous track (Rew)
10.1. Sharing music via Bluetooth (A2DP Sharing)
During the intercom connection, you can start playing music by briefly pressing the "ON" key. The
music will be played in both systems.
Music sharing temporarily cuts off the intercom conversation; however, this can be automatically
restored by stopping the music (this is done by briefly pressing the "ON" key).
N.B.: Music shared through the intercom can be managed by both systems, for example, both
systems can change the track by pressing the relative command.
N.B.: When the "Audio Multitasking" function (chapter 14) is enabled, the "Music Sharing" function is
temporarily disabled.
N.B.: the "Music Sharing" function can only be used with the N-Com series "600"/"900".
11. MUSIC VIA CABLE
Connect the mini USB connector of the Multimedia Wire (not included) to the helmet and the other
end to the audio device. A coloured band on the cable indicates the connector to be hooked up to
the audio device.
Turning on the cable audio
Turning off the cable audio
N.B.: While listening to music via cable, it will not be possible to keep the intercom connection active.
22
Briefly press "ON".
When the player is connected and playing music, briefly press
"ON".
When the player is playing music, press "" for about 2 seconds.
When the player is playing music, press "" for about 2 seconds.
Press the "ON" key three times.
Press the "ON" key three times.