Swarovski Optik AX VISIO Serie Manual Del Usuario página 23

camera. Details of the functionality can be found in the
description of each app function.
The arrow button allows you to move
between different functionalities in
each app.
Pressing and holding the ON/OFF
button will switch the device on or off.
If the device is switched on, pressing
briefly on this button will deactivate
or reactivate the display.
3.2 SWITCHING THE DEVICE ON
SWITCHING ON: Press and hold
ON 3s
the ON/OFF button for at least three
OFF 5s
seconds until the LED status indicator
changes from yellow to green. The
LED
AX VISIO is now switched on and is
starting up. The LED status indicator
flashes for around 30 seconds. After
this, the LED status indicator turns permanently green. The AX
VISIO is now ready to use and the display is active.
SWITCHING OFF: To switch off the AX VISIO, press and
hold the ON/OFF button for at least five seconds until the
LED status indicator briefly turns yellow and then switches off.
3.3 THE MODE SELECTION WHEEL
The mode selection wheel allows
you to switch between the individual
functions. The following applications
are available with the AX VISIO.
44
AX VISIO / EN AX VISIO / DE
3.4 FUNCTIONS
3.4.1 MERLIN BIRD ID
To launch the MERLIN BIRD ID bird
identification support, turn the mode
selection wheel to the bird symbol.
A circle divided into four segments
will then appear on the display. Two
different sizes of circle can be selected for identification
support. For effective identification support, it is important to
select the correct size of circle. For birds a short distance
away, choose the larger circle. If the bird is further away,
choose the smaller one. Use the arrow button to select the
correct circle size.
Once you have selected the correct size and placed the bird
to be identified in the center of the circle, depress the release
button to the first perceptible press point and hold. The AX
VISIO will then start to analyze the observation situation.
Depending on the probability of success of the identification
support, each of the segments of the circle will consecutively
be displayed in bold (for details of the individual quality
criteria, please refer to the table below). The situation will
continue to be analyzed for as long as you hold this first
perceptible press point, and you can then decide on the best
moment for identification support and to take a photo. To
complete the identification process, press the release button
all the way and then remove your finger from the button. Iden-
tification support is then completed and the result is shown in
the lower area of the display.
If you find the circle display distracting while observing,
you can briefly press the ON/OFF button to deactivate or
reactivate the display.
The result of the identification, including a photo, is saved
on the AX VISIO, and can later be downloaded to a smart-
phone. If no identification was possible or if you would like
more information about the result, you can use the MERLIN
BIRD ID or the SWAROVSKI OPTIK Outdoor app to transfer
the photo to a smartphone. You can then use the MERLIN
BIRD ID app on the smartphone to identify the photo again.
AX VISIO / EN AX VISIO / DE
45