Publicidad
English
1. Initial Setup
A. To use the controller, plug the USB cable into the Nintendo Switch dock. The controller should automatically pair with the device.
B. If the controller does not pair automatically, go into System Settings > Controller and Sensors > Change Grip/Order.
C. When prompted, press L and R on your controller to connect.
Note: You can also pair the controller directly from the Controllers Menu found on the Nintendo Switch Home Screen and select Change
Grip/Order.
2. Audio Setup
A. Plug the 3.5mm jack of your headset or headphones directly into the 3.5mm port on the controller.
Note: The Nintendo Switch only supports one audio output at a time. When connecting your headset/headphones into the controller, audio
via HDMI connected devices (i.e., TV, amp, etc.) will be disabled. When connecting more than one USB audio device, only the first device will
have audio output.
B. The Nintendo Switch will prompt you to reconnect the controller. Press L and R to connect and audio will start playing through the
headset/headphones.
C. If you do not hear audio after reconnecting your controller, the volume on your device may be low or at 0%. To turn up the volume, hold
down the "Home" button on the controller.
Note: Under the System Settings, there's an audio setting called "Mute when Headphones are Disconnected" that can be enabled. When
activated, this option will shut off the system speakers when unplugging or disconnecting a headset until the volume buttons are pressed, or
until this setting is manually turned off. To disable this setting manually, select System Settings > System > Mute when Headphones are
Disconnected (turn to off).
3. Volume Controls
A. To adjust the controller's volume, hold down the "function" button (located at the center of the controller between the + and – buttons)
and then press Up/Down on the D-pad.
B. Easily mute your connected headset/headphone's mic by pressing the "function" button twice. To unmute, press the "function" button
twice again.
Note: The volume controls only adjust the volume output by the controller, and not the volume level of the Nintendo Switch OS. Adjust the
Nintendo Switch OS volume in the device settings.
Publicidad
