cecotec VITADRY PRO Manual De Instrucciones página 27

disappear soon. Make sure that the appliance is well ventilated.
2. Make sure that all parts of the appliance are included and in good condition.
3. To clean the appliance properly, follow the instructions in the "Cleaning and maintenance"
section.
4. Dry all parts thoroughly before reassembling the appliance and resuming use.
Operation
1. Plug the power cord into a mains socket: the appliance will emit an acoustic signal and
the display will show OFF.
2. Then, press the power button to turn the device on.
Note: After 10 seconds of inactivity, the values on the display will light up steadily, and the
appliance will operate with the default time and temperature settings.
3. Press the select button to display the temperature. Press the increase or decrease button
to adjust the temperature from 35 to 70 °C.
4. Press the select button to display the time. Press the increase or decrease button to
adjust the time from 0.5 to 24 hours.
5. After 10 seconds of inactivity, the set time and temperature values will light up steadily
on the display. The appliance will operate according to the set time and temperature, and
the display will show a countdown. At the end of the countdown, the display will show
OFF, and the appliance will beep and switch off; the fan will continue to run for 2 more
minutes after switching off.
Space between trays
Fig. 3
1. The space between one tray and another is 15 mm.
2. Remove one or more trays depending on the size of the food to be dehydrated.
4. CLEANING AND MAINTENANCE
1. Unplug the device and allow it to cool down before cleaning it.
2. Use a soft, dry cloth to clean the housing of the appliance. Do not use metallic or abrasive
tools to avoid damaging the inner metal coating.
3. Wash the trays with water and dry them thoroughly before reuse. Do not use strong
detergents.
4. Before storing the appliance, make sure that it is completely cool, clean, and dry.
ENGLISH
27
VITADRY PRO