Conceptronic ALTHEA10W Guía De Instalación Rápida página 3

English
Congratulations on the purchase of your Conceptronic ALTHEA10W.
When problems occur, we advise you to visit our support site (go to
www.conceptronic.net and click on 'Support'). If you have other questions
about your product and cannot find it on our website, please contact us at:
support@conceptronic.net.
For more information about Conceptronic products, please visit the
Conceptronic website: www.conceptronic.net.
Installation & usage
◼ Plug the USB charger in a free wall outlet.
◼ Connect your USB device to the USB charger.
Your USB device will now be charged.
Safety & Warnings instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
◼ Keep the device away from water, humidity, fire or hot environments.
◼ Avoid dropping, throwing or crushing the device.
◼ Do not open, change or damage the device.
◼ Confirm that the wall outlet provides the same type of power indicated on the
device (both Voltage [V] and frequency [Hz]).
◼ Before use, verify that the device, the attached cable and the wall outlet are
not damaged in any way.
◼ Disconnect the product from the mains before cleaning.
Disposal of waste electrical equipment: Dispose of the product
at a recycling point. Do not dispose of together with household
waste. Incorrect storage/disposal can harm the environment and/or
cause injury.
CE marking: Conceptronic declares that this product complies with
the directives listed in the section 'Declaration of Conformity'.