Installation
Installation check codes
Check code
No problems
detected
Vent is nearly
clogged
Leave the dryer at
room temperature
Items detected in
the drum
NOTE
For other information codes, see the "Information codes" section on page 94.
46
English
Untitled-2 46
Meaning
Vent condition is good.
Over 80 % of the vent is clogged.
(This may lead to poor drying
performance or cause malfunction)
The internal temperature of the dryer is
too low (below 32 °F (0 °C)) or too high
(over 104 °F (40 °C)) and therefore vent
blockage cannot be detected.
Unit is detecting items inside the drum
or there is an error on the dry sensor.
Solution
1. Clean the lint filter.
2. Check your vent condition. (Refer to
the "Ducting requirements" section)
* You must take measures (such as
cleaning) through expert personnel.
Leave the dryer at room temperature
(41~95 °F (5~35 °C)) for an hour and
check again.
Remove items from the drum and check
again.
If the problem continues, contact a
service center.
2023-11-09
4:26:58