Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Excessive vibrations or
makes noise.
Does not drain and/
or spin.
88
English
Untitled-2 88
• Make sure the Laundry Hub is installed on a level, solid floor that is not
slippery. If the floor is not level, use the leveling feet to adjust the height
of the washer.
• Make sure the shipping bolts are removed.
• Make sure the Laundry Hub is not in contact with any other object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or clothes with metallic decorations can cause noise while being
washed. This is normal.
• Look for coins, loose buttons, nails, and other objects and remove them
immediately.
• Redistribute the load in the washer. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin result might be
unsatisfactory, and an "Unbalanced load detected" check message will be
shown on the display.
• Check the lint filter in the dryer. Remove any items stuck inside the lint
filter.
• The dryer may hum due to air moving through the drum and fan. This is
normal.
• Make sure the drain hose is straightened all the way to the drain system. If
you encounter a drain problem, call for service.
• Make sure the debris filter is not clogged.
• Close the door and touch and hold
tumble or spin unless the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is not
clogged.
• If the Laundry Hub is not supplied with sufficient power, the washer
will temporarily not drain or spin. As soon as the Laundry Hub regains
sufficient power, it will operate normally.
• Make sure the drain hose is positioned correctly, depending on the
connection type.
• Clean the debris filter as it may be clogged.
Action
. For your safety, the washer will not
2023-11-09
4:27:05
Publicidad
