Tenda CT6-WCAV2.0 Manual De Instrucciones página 10

Power on the camera
Power on the camera after the camera is mounted. When the camera completes startup, it will
automatically connect to the configured Wi-Fi network. When the LED indicator of the camera is solid
blue, you can use the camera normally.
Log in to the web UI of the camera
After the camera works properly, you can manage the camera through TDSEE App or web UI (Some
models of cameras support). (Please scan the QR code of Get support and services in this guide to
obtain the related user guide.)
To log in to the web UI:
1. Connect the computer to the router that is connected to the camera.
2. Set the IP address of the computer to an unused one belonging to the same network segment as the IP
address of the camera but different from the IP address of the camera.
By default, the login IP address of the camera is 192.168.1.203, and the DHCP function is enabled. If
there is a DHCP server in the network, the IP address of the camera may be changed. Please refer to the
actual IP address assigned to the camera by the DHCP server.
3.
Start a browser and enter the IP address of the camera in the address bar to access the login page.
Enter the Login Username (default: admin) and Login Password (default: admin123456), then click
Login.
Tips
For network security, after you log in to the web UI, please modify your password in time.
After successful login, you can start to configure the camera as required.
05