Descargar Imprimir esta página

Tenda CT6-WCAV2.0 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 150
Q3: How to store the video?
A3: Try the following solutions:
Method 1:
Install the micro SD card to the camera. The recording mode of the Micro SD card
supports Alarm Recording and All Day Recording. By default, the recording mode
is Alarm Recording, you can modify the recording mode according to the actual
conditions.
Method 2:
Subscribe to the Cloud Storage Service on TDSEE App.
Procedure: Run the TDSEE App, choose the camera on the homepage, then tap
Cloud in the lower left corner. You can enjoy free cloud storage service (7-days
continuous detection recording) for 3 months upon the first activation.
Method 3:
Connect the camera to the NVR. The camera supports the ONVIF protocol and can
be added to the NVR either wired or wireless method for recording storage. The
default user name and password of the camera are admin and admin123456
respectively, you can change the default password on the web UI (some models of
cameras support). The specific configuration method of the NVR is subject to the
manufacturer's instructions.
Q4: How to get full-color monitoring video through the camera no matter in the daytime or
at night?
A4: Set Night Vision Mode of the camera to Full-color Mode.
Method:
Run the TDSEE App, choose the camera on the homepage, then tap Settings (
the upper right corner) > Night Vision Mode, and choose Full-color Mode.
07
in

Publicidad

loading

Este manual también es adecuado para:

Ch7-wcav1.1Ct3-wcav1.0Ch3-wcav1.0