Tenda CT6-WCAV2.0 Manual De Instrucciones página 6

Appearance
The camera appearance varies with models. Please refer to the camera you purchased.
①
Ethernet port
②
Power jack
③
Speaker
④ ⑤
Fill light
⑥
LED indicator
⑦
Microphone
Micro SD card slot
⑧
( Behind the cover )
Reset button
⑨
( Behind the cover )
Orientation knob
⑩
( if any )
01
10/100 Mbps auto-negotiation Ethernet port, used for connecting such devices as the
router and switch.
Used to connect to the included power adapter.
/
/
Solid red: Initializing and starting.
Blinking red slowly: Disconnected from the network.
Blinking red quickly: Connecting to the network.
Solid blue: Connected to the network.
Blinking blue slowly: Upgrading.
Blinking blue quickly: Waiting to connect to the network.
/
Insert the Micro SD card to store the monitoring videos.
Hold down the reset button for about 5 seconds and release it after the LED indicator
blinks blue quickly or you hear a prompt tone. The camera is reset to factory settings
successfully.
Adjust the monitoring angle for the best view through your camera.