Gardena Select Libro De Instrucciones página 18

– The switching point as of which the sensor sig-
nals that the soil is moist – thereby preventing
watering – is selected via the number of levels.
– 0 dots for loamy soil
v Sensor response when soil is quite dry.
– 3 dots for sandy soil
v Sensor response when soil is very moist.
Soil Moisture Sensor, Art. 1188,
(optionally available,
models up to 2020)
The soil moisture level at which a watering
will not be carried out as per the schedule
can be set using the switching point controller on
the soil moisture sensor (see GARDENA Soil Mois-
ture Sensor Operator's manual).
Fig. J:
1 Active watering | 2 Change watering duration |
3 Stop active watering at any time
By pressing the
be started or stopped at a desired time. A dura-
7. TROUBLESHOOTING
Problem
No display appears
18
GAR_01891-20.960.09_2024-01-17.indb 18 GAR_01891-20.960.09_2024-01-17.indb 18
button, manual watering can
Possible Cause
Battery is inserted incorrectly.
Battery is flat.
Temperature on the display is higher
than 70 °C.
tion of between 1 minute and 59 minutes can be
selected.
5. MAINTENANCE
6. STORAGE
To put into storage:
v The product must be stored away from
children.
v To preserve the battery, it should be removed
(fig. B).
v Store the controller and the valve unit in a dry,
enclosed and frost-free place.
Remedy
v Check the polarity markings match (+ / –).
v Insert a new (alkaline) battery.
v Display appears after the temperature
has dropped.
v (Fig. E)
17.01.24 14:59 17.01.24 14:59