Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
E
s
i t
m
a
e t
d
A
s
s
e
m
b
Tools Required for Assembly: Phillips Screwdriver (not included)
INSTALLATION INSTRUCTIONS
● TO USE AS A FLOOR FAN
The fan comes fully assembled
TO ADJUST AIRFLOW UP AND DOWN
1. Tilt the fan to the desired angle.
2. Tighten the Adjustable knobs (B) on both
sides to secure the fan head.
● TO INSTALL AS A WALL FAN
Feed the screws (AA) through the
washers (BB) and the two holes on the fan
bracket (F) to secure the fan to the wall.
● WARNING
1. Mount fan on a wooden wall only.
2. To reduce the risk of electric shock and
personal injury, ensure the location for
mounting is able to support this fan.
3. Total weight of fan is 12.3 lbs.
4. It is recommended a qualified electrician
mount this fan.
● TO ADJUST AIRFLOW UP AND DOWN
1. Tilt the fan to the desired angle.
2. Tighten the Adjustable knob (B) on
both sides to secure the fan head.
HARDWARE USED
Screw
AA
BB
Washer
45 minute
y l
i T
m
: : e
1/8 in.Drill Bit (not included)
x2
x2
5
B
BB
AA
F
B
Publicidad
