Remote Control Function; Stop Button - Nevir NVR-682MDCUC Manual De Instrucciones

Micro sistema cd/mp3 cassette grabador con usb y lector de tarjetas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REMOTE CONTROL FUNCTION

Preparation before use
Installing batteries in the remote control unit
4.
Remove the battery cover from the back of the remote control unit.
5.
Insert one "CR2025 (3V)" size batteries.
Insert the batteries with the
6.
Replace the cover.
Battery replacement
When the remote control operation becomes unstable or t he distance from which the remote control works is shorter,
replace the batteries with new ones.
Using the remote control unit
3.
To use the remote unit, point at the REMOTE SENSOR and press the buttons gently and firmly. Remote control operation is
directly in front of the REMOTE SENSOR, for maximum distance.
4.
Do not expose the REMOTE SENSOR to strong light (direct sunlight or artificial lighting) and make sure that there are no
obstacles between the REMOTE SENSOR and the remote control unit.
1. FOLDER UP / DOWN button
2. SKIP + / - button
3. PROGRAM / MODE button
4. CD/ MP3/ USB/ SD button

5. STOP button

6. PLAY / PAUSE button
OPERATION IN REMOTE CONTROL
1
FOLDER UP button
FOLDER DN button
button
2
【SKIP+】
button
【SKIP-】
3
PROGRAM / MODE
button
4
CD/MP3/USB/SD
button
button
5
【STOP】
and
-
terminals matching the indication inside the battery compartment.
+
When the system is STOP mode, for MP3, Skip up to next folder in increasing order and display
folder number.
When the system is PLAY mode, for MP3, Skip up to next folder number in increasing order,
start play head track of the folder and display current folder and track number Press key once,
current folder number is flashing for 3s, press key again folder up is executed.
When the system is STOP mode, for MP3, Skip down to previous folder in increasing order and
display folder number.
When the system is PLAY mode, for MP3, Skip down to previous folder number in increasing
order, start play head track of the folder and display current folder and track number Press key
once, current folder number is flashing for 3s, press key again folder dn is executed.
Change the starting play track during stop mode, cyclic to the first track if it is in the last track.
Skip to the next track during Normal play, cyclic to the first track if it is in the last track.
When key is pushed more than 0.5 sec, Fast- Forward is executed.
Skip to the next programmed track during Program play, cyclic to the first programmed track.
Skip to the next random track during Random play.
Change the starting play track during stop mode, cyclic to the last track if it is in the first track.
kip to the previous track during Normal play, cyclic to the last track if it is in the first track.
When key is pushed more than 0.5 sec, Fast-reverse is executed.
Skip to the previous programmed track during Program play, cyclic to the first programmed
track.
PROGRAM: - Enter "Memory Registration" mode from Stop mode.
- Register a selected track number into program memory.
MODE: - CD: None-> Repeat 1 -> Repeat all -> RANDOM -> None.
- MP3: None -> Repeat 1 -> Repeat folder -> Repeat all ->RANDOM -> None.
Press this button once, it will be switched to CD or USB or SD mode.
In Play mode or Pause mode: Changing to Stop mode or Program Entry mode during program
play.
In Program Entry mode: Exit the Program Entry mode, clear program memory and change to
Stop mode.
In Random Play mode: Changing to Stop mode and release Random function.

Publicidad

Tabla de contenido
loading

Tabla de contenido