Nevir NVR-682MDCUC Manual De Instrucciones página 12

6
【PLAY/PAUSE】
button
KEY BASIC OPERATION
☆ FUNCTION button (TAPE, CD/ USB/ SD, RADIO)
To select the desired program source.
,●
☆ BAND button (AM, FM, FM ST. )
Move to select Radio Band
●
☆ PLAY/PAUSE (CD, USB, SD)
Press this button at stop mode, system will go to play mode.

Press this button at play mode, system will go to pause mode.

Press this button at pause mode, system will resume to play mode.

☆ STOP button
In Play mode or Pause mode: Changing to Stop mode or Program Entry mode during program play.

In Program Entry mode: Exit the Program Entry mode, clear program memory and change to Stop mode.

In Random Play mode: Changing to Stop mode and release Random function.

☆ PROGRAM / MODE key
In the player mode:
CD mode : None-> Repeat 1 -> Repeat all -> RANDOM -> None.

MP3 mode : None -> Repeat 1 -> Repeat folder -> Repeat all ->RANDOM -> None .....

In the stop mode:
1. If [MODE] key is pressed during the CD stop mode, the system goes to the program mode. During the program mode, the
track number and PROGRAM display will flash in the 500[ms] interval.
2. If [ SKIP]/[ SKIP ] key is pressed, the system chooses the track number which it wants to register.
3. If [MODE] key is pressed after choosing a track number, the system keeps the track number, and goes to next program
mode.
4. The system can hold 20 programs. After the system held 20 programs, it can't keep another song. During the system holding
20 programs, it can't keep other program. PROGRAM display and "P 01" will flash in the 500[ms] interval .
5. If [STOP] key is pressed during the program mode, the system removes the contents of the program, and cancels the
program mode.
6. If [PLAY/PAUSE] key is pressed during the system holding the program of more than one, it starts the program play. During
the program play, Display shows PROGRAM is play.
7. If [ SKIP] / [ SKIP] key is pressed during the program play, the system skips to next / previous program.
8. If [STOP] key is pressed during the program play, the system stops the program play, and goes the stop mode. Until [STOP]
key is pressed during the stop mode, the system keeps the contents of the program.
MP3 program mode:
1. If [MODE] key is pressed during the stop mode, the system goes to a program mode. During the program mode, a program
number and PROGRAM display flashes in 500[ms] interval.
2. If [FOLDER UP] /[FOLDER DOWN] key is pressed, the system chooses a folder number to be registered.
3. If [ SKIP] / [ SKIP] key is pressed, the system registers the folder number and chooses a track number to be
registered.
4. If [MODE] key is pressed after the track number is chosen, the system registers the track number and starts to program the
next track.
5. If [MODE] key is pressed again after all tracks are registered, the system goes to a program stop mode, and display shows
.
"P01"
CD Repeat Mode:
1. If [MODE] key is pressed, 2 selective repeat modes: Repeat 1 & Repeat all.
2. During the repeat-1 mode, the system repeats the current track of the CD.
3. During the repeat-all mode, if it reaches the end of the tune of the final track, it is usually returned to the head track.
Start playing from stop mode.
●
Start pause during play.
●
Return to play mode from a pause.
●