Nevir NVR-682MDCUC Manual De Instrucciones página 14

CASSETTE DECK/ Operate and INDICATORS
Before operating the cassette deck, make sure Function Selector is in the Tape mode.
PLAYBACK

Set Function Selector to Tape mode.

Open the cassette knob cover.

Press Eject button to open the cassette door.

Place the cassette tape into Deck, with the side to be
played facing the window.

Close cassette door and Press Play button to start
playback.

Playback stops when the tape reaches the end.

Press Stop button if you want to stop playback before the
end of the tape.
PLAY DECK CONTROLS
7. RECORD : to start recording to cassette tape.
8. PLAY : to start cassette playback.
9. REWIND : to fast rewind the cassette.
10. F.FWD : to fast forward the cassette.
11. STOP/EJ : to stop and eject the cassette.
12. PAUSE : to interrupt recording or playback
SPECIFICATIONS
Power Supply
Power Consumption
Output Power (Per channel)
Radio Section
CONTINUOUS IMPROVEMENT ARE BEING MADE TO OUR EQUIPMENT IN BOTH QUALITY AND PERFORMANCE, WE
HENCE RESERVE THE RIGHT TO ALTER SPECIFICATION WITHOUT PRIOR NOTICE.
In order to fulfill ruling UNE EN-60065, we indicate that if the flexible wire is damaged, it can only be substituted by a technical
service recognized by NEVIR, S.A., as per special tooling is required.
: AC ~ 230V / 50Hz
: 18 watts
: 2 watts RMS
: AM 525 – 1620 KHz
FM 87.5 – 108 MHz