Klarstein STUDIO 10 ARC Manual Del Usuario página 32

EN
32
Open window mode
Press the MENU button several times to enter the [ModE]
operating modes. Press OK to enter the mode setting and use the
(+) or (-) button to select the open window mode. The display will
show [OPEN].
Press OK to confirm and use the (+) or (-) button to select ON or OFF:
After activating the Open Window Detection, the appliance automatically switches off
the heating if it detects that the room temperature has dropped by more than 4 °C within
10 minutes. The heating stops for 20 minutes.
To restart the heater, reset the desired temperature and press the OK button to confirm
the setting. After resetting the temperature, open window detection is set to OFF.
Setting the Current Weekday and Time
Press the MENU button several times to enter the [ModE]
operating modes. Press OK to enter the timer setting and use the
(+) or (-) button to select the timer mode. The display will show
[TIME].
Press OK to enter the timer setting and use the (+) or (-) button
to select the desired day for which you want to set a timer. D1 =
Monday, D2 = Tuesday, D3 = Wednesday, D4 = Thursday, D5 =
Friday, D6 = Saturday, D7 = Sunday.
Press OK and use the (+) or (-) button to set the hour.
Press OK and use the (+) or (-) button to set the minute. Then press
OK again to save the setting.