Descargar Imprimir esta página

Hisense RS677N4WCD Manual Del Usuario página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
14
Display Controls(Only for some products)
Use your appliance according to the following control regulations, your appliance has the
corresponding functions as the display panels showed in the pictures below.
Controlling the temperature
For
preservation,
recommend that when
you start your refrigerator
for the first time, the
temperature
refrigerator is set to 5°C
and the freezer to -18°C.
If you want to change the
temperature, follow the
instructions below.
Note: High temperature
setting
food waste.
Caution! When you set a
temperature, you set an
average temperature for
the
cabinet.
inside each compartment
may vary from the temperature values
displayed on the panel, depending on how
much food you store and where you place
them. Ambient temperature may also
affect the actual temperature inside the
appliance.
Unlock
When the appliance is powered on for the
first time, the backlighting of the icons on
display panel starts working. If no buttons
have been pressed and the doors are
closed, the backlighting will turn off after
60 seconds.
All the buttons are locked if the icon "
is illuminated, press the "
for 3 seconds to unlock them. And it will be
locked itself after 20 seconds no pressing
optimum
food
we
for
the
will
accelerate
whole
refrigerator
Temperatures
"
" button
any button.
Mode Selection
You can select "
by pressing the "
unlock sate. And it will be selected after 10
seconds no pressing any button.
1.Super Freeze(
)
Super Freeze will quickly lower the
temperature within the freezer so food will
freeze faster. This can lock in the vitamins
and nutrients of fresh food and keep food
fresh longer.
When the function is activated, the
temperature of the freezer is automatically
switched to -24 ℃ .
In case of the maximum amount of food
to be frozen, please wait about 24 hours.
Super freeze automatically switches off
after 52 hours and after 52 hours, the
freezer temperature setting will revert back
to the previous setting.
2.Artificial Intelligence(
When the function is selected, the
temperature
of
automatically adjusted.
When the Artificial Intelligence function is
activated, the temperature of the fridge is
automatically switched to 5°C and the
freezer to -18°C .
Temperature setting
You can press the "
control the Fridge temperature when the
corresponding icon( ) flashes. When you
press
the
button
temperature will be set as the following
" "
" two modes
" button in the
)
the
appliance
is
" button to
continuously,
the

Publicidad

loading