Publicidad
Idiomas disponibles
Idiomas disponibles
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
4
Technical data
Weight without battery
Permissible weight of the attached power tool, including acces-
sories
Ambient temperature for operation
Storage temperature
4.1
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2
Noise information in accordance with EN 62841-1:2015, AC:2015
The sound pressure values given in these instructions have been measured in accordance with a standardized
test and may be used to compare one power tool with another. They can also be used for a preliminary
assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise such as: maintaining the
power tool and accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
5
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
*2375781*
)
)
WA
)
pA
)
pA
2375781
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
7.75 kg
6 kg ... 17 kg
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
83 dB(A)
3 dB(A)
72 dB(A)
3 dB(A)
English
21
Publicidad
