Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION: Wall Mounting
1. Slide out face plate and red diffuser by removing the
screw on side of the unit (Figure 1).
2. Knock out appropriate mounting holes and cable entry
hole on back plate of the housing.
3. Feed AC supply leads through the center hole into the
housing. Mount fixture to the Junction Box using the
(2) 1" long 8-32 screws (Figure 2).
4. Make proper electrical connection, refer to Wiring
Diagram on page 1, then push excess wire into
Junction Box.
5. Connect Battery connector to PC board (Figure 4).
6. Remove proper directional chevron(s) from the face
plate carefully as required.
7. Restore the face plate and red diffuser components
on the main frame, then secure side cover with screw.
8. Restore AC power, charge indicator will turn on, press
test button for manual test.
INSTALLATION: Side or Ceiling Mounting
1. Slide out face plate and red diffuser by removing the
screw on side of the unit (Figure 1).
2. Remove the (3) Knock outs on side of housing for
side mounting. If ceiling mounting, then remove the
(3) Knock outs on top of housing.
3. I f double face is desired, replace back plate with
additional face plate and diffuser provided.
4. Assemble canopy on main frame by (2) 1" long 8-32
screws and nuts.
5. Determine if Adapter Plate will be need for proper
orientation of the exit sign. If it is needed, install it on
Junction Box with (2) 1" long 8-32 screws.
6. Feed the AC supply leads through the canopy and
cable entry hole into the housing.
7. Mount fixture to the Junction Box using the (2) 1" long
8-32 screws (Figure 3).
8. Make proper electrical connection, refer to Wiring
Diagram on page 1, then push excess wire into
Junction Box.
9. Connect Battery connector to PC board (Figure 4).
10. Remove proper directional chevron(s) from the face
plate carefully as required.
11. Restore the face plate and red diffuser on the main
frame, then secure side cover with screw.
12. Restore AC power, charge indicator will turn on, press
test button for manual test.
Figure 1
Figure 2
Figure 3
Figure 4
2
Publicidad
