Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Power tool use and care
a)
Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it on and off. Any power tool that can not be
controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do nof allow persons unfamiliar operate the
power tool. Power tools are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of fhe power tool for opera-
tions different from those intended could result in a hazardous situation.
5.
Use and handling of the cordless electrical power tool
a)
Charge a rechargeable battery unit using only the charger recommended by the manufacturer.
Chargers are often designed for a particular type of rechargeable battery unit. There is the danger
of fire if other types of rechargeable battery units are used.
b)
Only the rechargeable battery units supplied are to be used with an electrical power tool. The use
of other rechargeable battery units may lead to the danger of injury or fire.
c)
When they are not being used, store rechargeable battery units away from paper- clips, coins,
keys, nails, screws or other small metal objects that could cause the contacts to be bridged.
Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.
d)
Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid
contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical
help if any of the fluid gets into your eyes. Escaping balfery fluid may cause skin irritation or burns.
CAUTION! RISK OF EXPLOSION! Never charge non-rechargeable batteries!
Protect the rechargeable battery from heat, for example from continuous exposure
to sunlight fire, water and moisture. There is a risk of explosion.
6.
Service
a)
Have your power tool serviced by a qualified repair person using only identical replace
parts. This will ensure that the safety of the power tool is maintained.
Appliance-specific safety instructions for jigsaws
■
Hold the power tool by the insulated gripping surfaces when carrying out work during which the
power tool may contact hidden power cables.Contact with a live wire may electrify exposed metal
parts of the power tool and could give the operator an electric shock.
All manuals and user guides at all-guides.com
- 06 -
ment
Publicidad
