Descargar Imprimir esta página

BaByliss 9000 Instrucciones De Uso página 8

Ocultar thumbs Ver también para 9000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
HOW TO USE YOUR BABYLISS 9000
INSTRUCTIONS FOR USE
• Remove the silicone plate guard
and allow the straightener plates
to open. Please note for safety
reasons you will be not be able
to switch your straightener on
when it is in the closed positioned.
• Press and hold the on/off button for
2 seconds the gentle notification
sound indicates that your straightener
is switched on.
• Once the straightener is switched
on it will automatically start heating
up to160°C.
• There are 3 temperature settings
160°C, 180°C and 200°C which
are indicated by the LEDs as
shown below.
• To select the temperature setting
press the on/off button once, twice
or three times.
Default temperature : 160
• The LEDs will flash when your
straightener is heating up and will
stop flashing once the target
temperature is reached and it
is ready to use.
Temperature select
o
High (200
C)
o
Medium (180
C)
o
Low (160
C)
o
C
• If you have delicate, fine, bleached
or coloured hair, use the lower heat
setting. For thicker hair, use the higher
heat setting. We suggest when using
for the first time you test the heat
settings to ensure you've got the
correct temperature for your hair
type. Start on the lowest setting and
increase the temperature as necessary.
• Ensure your hair is dry and
combed through.
• Divide hair into sections.
• Take a section of hair and place it
between the styling plates.
• Hold hair firmly and slide the
straightening plates down the length
of the hair from root to tip.
• Repeat as necessary.
• Allow hair to cool before
combing through.
• To switch off your straightener please
press and hold the on/off button
for 2 seconds. The gentle notification
sound indicates the straightener has
switched off.
• Once your straightener is switched
off, place the heat resistant silicone
plate guard over the straightening
plates in a closed position.
• Allow to cool before storing away.

Publicidad

loading

Este manual también es adecuado para:

9000ruC200a