Publicidad
Idiomas disponibles
Idiomas disponibles
1. Placement Of The Mounting Plate
A. REMOVING THE MICROWAVE OVEN FROM THE CARTON/REMOVING THE
MOUNTING PLATE
1. Remove the top cover board, installation instructions, use and care, exhaust adapter,
turntable ring, shelf, filters, glass tray and the small hardwarebag. Do not remove the
Styrofoam protecting the front of the oven.
Shelf (For
some models)
2. Fold back all 4 carton flaps fully against carton sides. Then carefully roll the oven and
carton over onto the top side. The oven should be resting in the Styrofoam.
Styrofoam
3. Pull the carton up and off the oven.
Top Cover Board
EPE Pad
Filters and Turntable Ring below glass tray
Small Hardware Bag
Exhaust Adapter
EN-18
Carton
Publicidad
