Oxford
®
Classic Lifts
4. Safety Precautions
Please read and follow the safety precautions listed below. The operation and use of Oxford
patient lifts is simple and straightforward. Following these few basic safety precautions will
make lifting operations easy and trouble free.
• ALWAYS plan your lifting operations before commencing.
• ALWAYS carry out the DAILY CHECK LIST before using the lift.
• ALWAYS familiarise yourself with the operating control and safety features of a lift
before lifting a patient.
• DO NOT use a sling unless it is recommended for use with the lift.
• ALWAYS check the sling is suitable for the particular patient and is of the correct size
and capacity.
• NEVER use a sling which is frayed or damaged.
• ALWAYS fit the sling according to the instructions provided (user instructions).
• ALWAYS check the safe working load of the lift is suitable for the weight of the
patient.
• ALWAYS carry out lifting according to the instructions in the user manual.
• NEVER disconnect or bypass a control or safety feature because it seems easier to
operate the lift.
• NEVER force an operating or safety control. All controls are easy to use and do
not require excessive force to operate. If a control is not working easily there will be
a reason. Forcing will only strain or damage the lift and may compromise safety. If in
doubt, contact your authorised Oxford Service Provider or Joerns Healthcare.
• DO NOT lift a patient with the castor brakes on.
• DO NOT attempt to manoeuvre the lift by pushing on the mast, boom or patient.
• ALWAYS manoeuvre the lift using the handles provided. DO NOT attempt to apply
additional side force to the boom or legs of the lift in order to manoeuvre the product.
• ALWAYS lower the patient to the lowest comfortable position before transfers.
• DO NOT push a loaded lift at speeds which exceed a slow walking pace
(3 kilometers/hour 0.8 metres/second).
• DO NOT push the lift over uneven or rough ground, particularly if loaded.
10
WARNING
English