KSIX CORE Manual De Instrucciones página 2

1.4 How to attach and remove the straps
Although only one strap is included in the box, it can be attached and removed easily. The
shorter strap must be placed in the display's top slot, while the longer strap must be placed
in the display's bottom slot. Otherwise, the insertion system may be irreparably damaged.
1. To remove a strap: Hold the strap and carefully slide the metal piece out of its hole.
2. To attach a strap: Hold the strap and insert the metal piece on one end. Then, slide the
metal piece on the other end and insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
1.5 Charging
The Core smartwatch's full charge time is approximately 2 hours, and the battery can last up
to 5 days depending on the usage.
Use the 60 cm USB-A cable with magnetic charging port that is included in the box to
charge the smartwatch. Connect the USB-A connector to a charger, computer output or
powerbank and place the magnetic port in a way so that it sticks to the 2 golden pins
featured on the back part of the body watch.
1.6 Power on/off
To turn on the smartwatch press the button for 3 seconds.
To turn o the smartwatch, press the button for 2 seconds; 3 options will pop up: power o ,
factory reset and reboot. Tap on power o or any other desired option.
You can also turn it o from the power o icon on the main menu.
1.7 About IP protection rating
The Urban 4 smartwatch has an IP68 protection rating. This means that it can withstand
being submersed under water 1,5 meters for up to 30 minutes. Make sure to use the
auto-drain function after submerging it; you will find it in the options menu depicted as a
water drop icon.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the
watch with fresh water after immersion due to the corrosive e ect of salt water.
2. Initial setup
2.1 Download the app
The Core smartwatch compatible app is called Co-Fit. There are several ways to download it:
- Tap here to download the Co-Fit app from Google Play or App Store.
ht t p s: / / p l a y. g oogl e . c om/ s t o r e / a pps/ d et a i l s ?i d =com. c odi n gi o t . c o. t & hl = es&gl = US
https: / /apps. a ppl e . c om/es/app/co- t/i d 1514529526
- You can also download the app directly by typing "Co-Fit" in the Google Play or App Store
search engine.
- Another way to download the app is from a QR code. This QR code will appear when you
power on the smartwatch. You can also get the QR code by swiping the home screen
downward and tapping on the QR icon.