GE GBT640 Serie Manual Del Propietário página 8

Getting started
To LOCK the dishwasher control, press the Light & ECO and 1Hr Wash buttons for 3 seconds and
the lock indicator will appear on the display (PBP665, PBT865).
To UNLOCK the dishwasher control, press the Light & ECO and 1Hr Wash buttons for 3 seconds
and the lock indicator will no longer appear on the display (PBP665, PBT865).
Start Dishwasher
Start Press the Start button and close the door within 4 seconds to start the cycle or begin the Delay
Hours countdown. The wash cycle will begin shortly after closing the door. The display will turn
off if the door remains open for two minutes. To activate the display, close and open the door or
press any button.
Interrupt To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
or Pause cycle to pause. To restart or resume the cycle, press Start, and close the door within 4 seconds.
Cancel To cancel a wash cycle, press and hold the Start button for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
Cycle Indicator Lights and Sounds (GBT640 and PBT865 models)
Located on the right side of the front of the dishwasher, these lights indicate the process in this running cycle.
Cycle Indicator Lights and Sounds (GBP655 and PBP665 models)
WASH
1
DRY
2
CLEAN
3
8
1 2 3
3
2
1
When the dishwasher is in a wash or rinse portion of a cycle, the Wash lights are
illuminated.
When the dishwasher is in a drying portion of a cycle, the Wash and Dry lights are
illuminated.
After the dishwasher has completed all portions of a cycle, all indicator lights are
illuminated. If you open the door they will turn off immediately.
29-6376