Publicidad
Idiomas disponibles
Idiomas disponibles
-
All Safewaze full body harnesses must IMMEDIATELY be removed from service if subjected to fall
arrest forces.
-
Safewaze full body harnesses shall be inspected by the end user prior to each usage and by a Competent
Person other than the user at least annually. These annual inspections shall be documented.
6.0 LIMITATIONS & REQUIREMENTS
When installing or using this equipment always refer to the following requirements and limitations:
6.1 CAPACITY
Safewaze Full Body Harnesses are designed for the following weight capacities (Maximum capacities include clothing,
tools, and equipment):
6.2 ANCHORAGE
Anchorages selected for fall arrest systems shall have a strength capable of sustaining static loads applied in the
directions permitted by the system of at least:
1.
5,000 lbs. (22.2 kN) for non-certified anchorages, or
2.
Two times the maximum arresting force for certified anchorages.
When more than one fall arrest system is attached to an anchorage, the strengths set forth in (1) and (2) above shall be
multiplied by the number of systems attached to the anchorage.
From OSHA 1926.502 and 1910.66
Anchorages used for attachment of personal fall arrest systems shall be independent of any anchorage being used to
support or suspend platforms, and capable of supporting at least 5,000 lbs (22.2 kN) per user attached, or be designed,
installed, and used as part of a complete personal fall arrest systems which maintains a safety factor of at least two, and
is under the supervision of a qualified person.
6.3 INSPECTION FREQUENCY
Either the Authorized Person (User), or the Rescuer must inspect this equipment before each use. Annual inspections
must be completed by a Competent Person other than the user. Results must be documented.
6.4 RESCUE PLAN
When using this equipment, employers must create a rescue plan, and provide the means to implement the plan.
This plan must be communicated to equipment users, authorized persons, and rescuers. Rescue operations require
specialized equipment beyond the scope of this manual. See ANSI Z359.4-2013 for specific rescue information.
NOTE
6.5 FREE FALL
In order to ensure reduced fall distances, always attempt to anchor the connecting device directly overhead. Overhead
anchoring will limit free fall distance to a minimum. Be aware of workers sharing the workspace to avoid becoming tangled
with another worker. Steer clear of objects that could fall and impact a lifeline. The lifeline should never pass under the
user's arms or legs. A lifeline should never be knotted, clamped, or be otherwise modified.
6.6 BODY SUPPORT
A Personal Fall Arrest System (PFAS) must utilize a Full Body Harness. Refer to Figure one of this manual for specific
FBH D-ring approved applications
ANSI Z359: 130-310 lbs max
OSHA:
Up to 420 lbs max
: Special rescue measures may be required for a fall over an edge.
V2.0 2022 Copyright Safewaze
User Manual
2
Publicidad
