Num'axes CANICOM R-500 Manual De Instrucciones página 17

4.1. 1/2 or 1/2/3/4 buttons | Dog/collar selection
Use the 1/2 or 1/2/3/4 buttons of the remote control to select the dog you want to send a message to.
4.2. Beep sound button
If you press the Beep sound button, the receiver collar will emit beep sounds. There is no time limit for this
function: the collar will continue to beep for as long as the button is pressed.
It is possible to use the beep sounds in several ways depending on the training method used. They can for
example be used to warn the dog of his mistake or to attract his attention from a distance. It is very important
to always use the beep sounds in the same way so as not to disturb the dog.
4.3. Vibration button
If you press the Vibration button, the receiver collar will emit vibrations. The collar will continue to vibrate for as
long as the button is pressed but no more than 8 seconds maximum.
If you press the Vibration button for more than 8 seconds, the function will automatically go into safety mode.
The "Padlock" icon on the remote control screen indicates this safety setting. The function remains blocked for a
minimum of 8 seconds.
It is possible to use the beep sounds in several ways depending on the training method used. They can for
example be used to warn the dog of his mistake or to attract his attention from a distance. It is very important
to always use the beep sounds in the same way so as not to disturb the dog.
4.4. Static stimulation button
If you press the Stimulation button, the collar will emit static stimulations. Those stimulations are transmitted by
the two contact points located on the receiver collar for as long as the button is pressed but no more than 8
seconds maximum.
If you press the Stimulation button for more than 8 seconds, the function will automatically go into safety mode.
The "Padlock" icon on the remote control screen indicates this safety setting. The function remains blocked for a
minimum of 8 seconds.
 and — buttons – Static stimulations level adjustment
4.5.
Use the  and — buttons to adjust the level of the stimulations transmitted by the receiver collar.
Always start with the lowest level of stimulations (level 1).
CANICOM R-500 remote control: 15 levels of stimulation available
CANICOM R-800 remote control: 20 levels of stimulation available
CANICOM R-1500 remote control: 25 levels of stimulation available
Level 1: very weak stimulation – Level 15/20/25: strong stimulation
The maximum intensity level is identical on the three remote controls of the CANICOM R range.
CANICOM R-500 Level 15 = CANICOM R-800 Level 20 = CANICOM R-1500 Level 25
4.6. Booster button
Press the Booster button to stop your dog instantaneously.
You can choose the stimulation level you think to be the best for an immediate effect. As a result, you do not
waste time repeatedly pressing the  button.
The static stimulations are transmitted by the two contact points located on the collar for as long as the button
is pressed but no more than 8 seconds maximum.
Guide d'utilisation CANICOM R-500, R-800, R-1500 – Indice A – Février 2024 - 17/64