Publicidad
ORIGINAL INSTRUCTIONS
EN
Safety, performance, and dependability
have been given top priority in the
design of your soldering iron.
INTENDED USE
The soldering iron is only intended for
soldering circuits, electrical connections,
jewellery, stained glass, and other crafts.
Do not use the product for any other
purpose.
SOLDERING IRON SAFETY
WARNINGS
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical,
sensory
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe
way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
The
product
household use only.
Always place the soldering tip cover
on the product before laying the
product down. Lay the product on its
side where the base is located, so
the tip does not come in contact with
anything while it is heating or when
not in use. Following this rule will
reduce the risk of damage to items,
burns, fire or serious personal injury.
Do not touch the heated tip of the
soldering iron.
Always assume that the soldering
iron tip is hot.
or
mental
is
intended
for
Use the soldering iron in a well-
ventilated area to avoid breathing
fumes.
Do not point the tip of the soldering
iron at another person.
Do not place your hands or fingers
near the tip of the soldering iron.
Never leave the product unattended
while it is in the on position.
Always remove the battery pack and
allow the soldering tip to cool for a
minimum of 10 minutes before removing
the tip. Touching a hot soldering tip can
result in serious personal injury.
Always remove the battery pack
and allow the product to cool before
leaving, transporting, or storing.
Storing a soldering iron with a hot
tip can cause serious burns and/or
ignite combustible objects.
Remove
the
battery
the product before making any
adjustments, changing accessories,
or storing the product. Such preventive
safety measures reduce the risk of
starting the product accidentally.
Do not allow children to use the
soldering iron. It is not a toy.
Do not solder live circuits.
Do not disassemble the product.
The soldering iron tip is sharp. Do
not touch the tip or allow it to come
in contact with anything other than
soldering wire and the workpiece
material.
Exhausted batteries are to be
removed from the product and
safely disposed of.
If the product is to be stored unused
for a long period, the batteries
should be removed.
The supply terminals are not to be
short-circuited.
EN
FR
DE
ES
IT
NL
PT
pack
from
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
Publicidad
