Montarbo NETTUNO 20 Serie Manual De Uso página 32

NETTUNO 20
10.5
90°
40°
In this case, turn the horns of both tops to obtain the
correct acoustic coverage as follows:
Undo the ten screws (five per side) and remove the
grille; undo the eight screws to remove the horn, turn it
by 90° and then refit it. The horn is normally mounted
with the opening vertical as shown in the figure, giving
a coverage of 90°x40 (HxV).
10.7
SUB 1
Link the audio signal by connecting Output Link on the
first subwoofer to Input on the second one; link the power
supply by connecting Mains Link on the first subwoofer
to Mains Input on the second one, and link the RDNet
signal by connecting Data Out on the first subwoofer to
Data on the second one.
32
10.6
40°
90°
Then connect each subwoofer to its top with the
speakON
SUB 2
cables provided.
®