ZKTeco ML200 Manual De Usuario página 4

Emergency Charging: The bottom of the outdoor assembly is provided with a Micro-USB
interface. Use a power bank to charge the lock when it is out of power.
Emergency Mechanical Key: The mechanical key is used to open the door when the lock
has any electronic malfunction. Slide the key cover and insert the key to unlock in
emergency situations.
Bluetooth Connectivity: The lock is designed with BLE5.0 communication, you can
unlock it via your smart phone when the Bluetooth is connected.
*Remote Access: This function is only available for the additional Smart Gateway. With
the Smart Gateway installed, the lock can be controlled remotely via ZSmart App.
*Voice Assistant Control: This function is only available for the additional Smart
Gateway. The lock can be unlocked using your voice commands through Amazon Alexa
and the Google Assistant.
Resetting the Lock
1
Please note all registered user data will be deleted and restored to the factory
default setting.
If Paired with App: Tap the EDIT button on the upper right corner of Device Interface,
and click "Disconnect and wipe data" to remove the lock from your ZSmart Account. Then
press and hold the reset button until you hear one long beep and two short beeps.
If Never Paired: Press and hold the reset button until you hear one long beep and two
short beeps.
Pairing the Lock with App
2
Note: If you don't want to use the App, please check the next section i.e. "Programming
the Lock in Standalone Mode"
Step 1
Search for the "ZSmart" App in iOS App Store or Google Play Store, or
scan the QR code to download the App.
Lock Setup
2 2