Publicidad
Fill the water tank (2) as shown in figure g. Close the water fill cap (10) tightly.
After that, go on to select the operating mode of the device.
Setting the operating mode of the device
To set the operating mode, point the nozzle's outlet in a safe direction so that
the water jet does not damage the interior and so that you can see the mode
selection panel (5).
Press the button (3) to turn on the device. The operating mode indicator on the
irrigator panel (5) will light up. Use the mode selection button (4) to select the
desired mode. The first time you turn on the device, the default operating
mode is "High". Subsequent single presses of the mode selection button (4)
alternately change the operating modes, which are displayed on the panel (5).
Device operating modes
"High": intensive cleaning for healthy gums;
"Medium": daily standard cleaning, plaque removal;
"Light": gentle cleaning for sensitive teeth and gums. Also recommended for
first-time users of the device;
"Spot": thorough oral care, removal of food remnants from interdental
spaces, prevention of tartar formation. Water is ejected when button (3) is
pressed.
Each mode of the device has three power levels: high, medium, low. To switch
the power level, press and hold the button (4) for 3 (three) seconds. The mode
and its power level, set during the last use, will be automatically selected the
next time the irrigator is turned on. Turn off the device by using the button (3).
Device operation
Point the nozzle's outlet (1) into your mouth cavity. Press the button (3) to turn
on the device. Move the nozzle's outlet (1) along the gum contour as shown in
figure h. During the cleaning, you can switch the operating mode and its power
level with the button (4). When you have finished the cleaning, press the
button (3) to turn the device off. If you do not turn off the device, it will
14
aeno.com/documents
Publicidad
