American Standard AquaWash Essentials 8043A60G Manual Del Propietário página 4

1
PRODUCT INSTALLATION PROCEDURES
1. Insert the bolts in sliding plates.
2. Press the release button and remove
the seat mounting plate.
3. Insert bolts with sliding plates into
the Seat Mounting Plate.
2
INSTALLATION PROCEDURES
1 . Install the nuts into the holes in
the toilet bowl.
3 . Screw the bolts into the nuts. Do
not fully tighten.
760422-100 (6/23)
1.
2.
3.
2. Place the Mounting plate with bolts and
sliding plates onto the toilet bowl. Align
the bolts and sliding plate with the seat
post hole.
4. After mounting the mounting plate, slide
the bidet seat fully into position until it
clicks into place.