American Standard AquaWash Essentials 8043A60G Manual Del Propietário página 8

CARE AND CLEANING
1. CLEANING SEAT AND LID
Use a smooth sponge/cloth with a mild cleanser to clean the product. Do not use the
following: hydrogen chloride detergent, paint thinner, benzene, abrasive paper, polishing agent,
fragrances and insecticide, etc.
2. CLEAN THE NOZZLE
Pull out the nozzle softly and use smooth cloth/sponge or toothbrush with a mild cleanser to
clean the nozzle.
3. TO RELEASE THE WHOLE BIDET SEAT
Press the button, pull the seat forward.
DO NOT USE HARSH CHEMICALS ON TUB SURFACE
Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or
other surface blemishes. Abrasive cleaners or powders must not be used, since they will dull the
surface.
Do not wax areas where you walk or stand.
Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to
come into contact with the surface.
Clean the surrounding surface immediately after using caustic drain cleaners.
Burning cigarettes will damage the surface.
Should damage to the fixture occur, repairs can be made quickly and easily. Your distributor or
builder can provide details.
SPIC AND SPAN is a registered trademark of The Spic And Span Company
®
LESTOIL is a registered trademark of the Clorox Company
®
LYSOL is a registered trademark of Reckitt Benckiser
®
WINDEX is a registered trademark of S.C. Johnson & Son, Inc
®
MR. CLEAN is a registered trademark of Agile Pursuits Franchising, Inc.
®
DOW is a registered trademark of Dow Chemical Company
®
760422-100 (6/23)