cecotec Bolero Coolmarket TF BI 101 E Manual De Instrucciones página 56

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Control panel
2. Freezer drawer
3. Shelves
4. Ice tray
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
To make the most out of the freezer in terms of energy, place all the shelves and drawers in
their original position, that is, as shown in Figure 1.
2. BEFORE USE
- This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Bolero CoolMarket TF BI 101 E Freezer
- Instruction manual
3. INSTALLATION
1. Conditions for proper ventilation
The location you choose for the installation of the freezer must be properly ventilated and
away from heat sources. Do not place the freezer near heat sources, like a cooker hob or pot,
and avoid direct sunlight to ensure the cooling effect and save on energy consumption. Do
not place the freezer in a damp place to avoid rust or loss of cooling performance, and do not
expose it to rain.
56